Operation
11
Compress Hybrid 7000i AW – 6721833054 (2020/09)
Activate extra DHW cylinder charging
If you have a temporary need of more hot water outside of normal DHW
charging or time program:
▶ Press the button.
-or-
▶ Open the menu DHW > Extra DHW.
▶ Set the maximum DHW temperature and duration as desired.
▶ Select and confirm Start now.
▶ Select Yes in the pop-up window and confirm.
▶ The water heating becomes active immediately. Once the set
duration time has expired, the extra DHW cylinder charging switches
off again automatically.
Open the menu for adapting the time program for DHW heating
▶ Open the main menu.
▶Open the DHW > Time program menu.
▶ Select Own time program and confirm.
▶ Set switching times and operation modes.
3.2.10 Setting up a holiday program
Open the menu for the holiday program
▶ Open the main menu.
▶ Open the menu Holiday > Holiday 1, 2, 3, 4 or 5.
Once the holiday period for the chosen holiday program has been set,
the corresponding menu Holiday 1, 2, 3, 4 or 5 is displayed.
Setting the holiday period
▶ Open the menu for the holiday program.
▶ If the holiday period for the chosen holiday program has already been
set, open the Holiday period menu.
▶ Select and confirm the day, month and year for Start: and End: of the
holiday period.
▶ To complete the entry, select Continue and confirm.
Setting the heating and DHW for the holiday program
▶ Open the menu for the holiday program.
▶Open the Selection heat. circ./DHW menu.
▶ Select and confirm the heating circuits and DHW systems.
▶ The holiday program is valid for the selected heating circuits and
DHW systems.
▶ To complete the selection, select Continue and confirm.
▶ Check the settings for Heating and DHW in the menu for the chosen
holiday program, and modify if required.
0010008209-001
To Next Page
Loading...
