Bosch Condens 7000 F - Page 20

Installation
Condens 7000 F – 6720871560 (2019/11)
20
Fig. 17 Safety set, 3 bar (illustration shows right-hand boiler setup)
[1] Manifold with taps and thermal insulation
[2] Twin nipple
[3] Extension
[4] Flow temperature sensor
[5] O ring
[6] Discharge pipe connection
Fig. 18 Safety set, 3 bar (illustration shows alternative installation
setup)
[1] Manifold with taps and thermal insulation
[2] Twin nipple
[3] Extension
[4] Flow temperature sensor
Connection of safety set, 4-6 bar
 Seal the pressure relief valve at the threaded connection of the
heating flow using suitable sealants or supplied gaskets (Fig. 19).
 Fit the discharge pipe to the respective pressure relief valve
according to local regulations.
Fig. 19 Safety set, 4 to 6 bar (illustration shows right-hand boiler
setup)
[1] Pressure relief valve 4 ... 6 bar
[2] Manifold with taps and flange
[3] fitting
[4] Extension
[5] Hexagon bolts
[6] Flat gasket
[7] Hexagon nuts
[8] O ring
[9] Discharge pipe connection
0010012549-001
1
1
2
3
5
2
3
4
6
0010013914-001
1
2
3
4
0010012552-001
8
1
2
3
4
1
5
6
7
3
4
2
6
4x
4x
9