6 720 821 652 (2017/05) CRC200
18 | Working with the MENU
5.6 Displaying information about the system
Info menu
The current system values and the active operating status can
be displayed easily via the Info menu. No changes can be made
here.
Menu Info > Heating
Menu Info > DHW
Canceling the vacation program early
▶ Open the Holiday menu.
▶ Press the dial.
The setting value ON starts to flash in the input field.
▶ Turn the dial to select OFF and press the dial.
The vacation program is ended prematurely. The setting values for the vacation begin and
vacation end dates are deleted.
1) If the vacation begin date precedes the current date, the year vacation begins is the coming year.
2) If the vacation end date precedes the vacation begin date, the year vacation ends is the year following the year vacation begins.
Operation Result
Table 15 Activating, setting, interrupting or prematurely ending the vacation program
6 720 811 158-34.1O
Holiday prog.
The DHW menu is displayed only if the user
interface is installed and set up appropriately
in a system with water heating.
Opening the menu
▶ Press the menu key to open the main menu.
▶ Turn the dial to highlight the Info menu.
▶ Press the dial to open the info menu.
▶ Turn the dial to select a submenu, e. g. DHW.
▶ Press the dial to open the selected menu.
Display information
▶ Turn the dial to select a menu item, e. g. Actual Temp.
(= current hot water temperature)
If no information appears in the value display:
▶ Press the dial.
The information for the selected menu item appears.
▶ Press the Back key to return to the menu item.
Closing the menu
▶ Press the Back key to return to the next higher menu.
▶ Press the Back key for an extended period of time to close
the main menu.
Table 16 Operating the info menu
Menu item Description (possible displays)
Outdoor
Temp. ()
The currently measured outdoor temperature,
e . g. – 23 °F ( – 5.0 °C). This menu item is
displayed only if an outdoor temperature
sensor is installed.
Operat.
stats
The heating system can have four different
operating conditions. The current status of
each heating zone assigned is displayed:
• If OFF is displayed, the heating is off, but
frost protection remains active.
• If Heating or Setback is displayed, the
heating system is operating in automatic
mode. Based on the time program, the
system heats to the temperature set for the
particular operating mode.
• If Manual is displayed, the heating system
operates in the manual mode.
Room
Temp.
The currently measured room temperature,
e. g. 72 °F (22.0 °C).
Table 17
Menu item Description (possible displays)
Operat.
stats
Display of the current operating status of water
heating: ON or OFF
Set temp. Desired hot water temperature, e . g. 122 °F
(50.0 °C).
Actual
Temp.
The currently measured hot water
temperature, e. g. 117 °F (47.0 °C).
Table 18
To Next Page
Loading...
