6 720 821 652 (2017/05) CRC200
6 | Overview of controls and symbols
Fig. 2 Symbols on the display (sample figures)
Item Symbol Designation Explanation
1 Value display Display of the current room temperature and input field for the desired room
temperature
Display of information values and input field for setting values
2 pm/am Time of day Afternoon/morning with 12-hour format (factory setting 12-hour format)
3 – Text line Time of day (e. g. 02:03pm) and current day of the week (e. g. Mo)
Display of menu items, settings, info texts etc. Additional texts are identified by
direction arrows and displayed by turning the dial.
4 Operating mode Automatic Mode Active (according to time program)
Hold Mode Active (manual operation)
Heating Circuit Active
Setback Mode Active
5 Segment display Solid segments: time set for operating mode today (1 segment = 30 min)
No segments: time set for setback mode today (1 segment = 30 min)
6 Operating state Burner operational
7 Menu Heating Menu with settings for the heating system
Menu DHW Menu with settings for water heating
Menu Holiday Menu with settings for vacation program
Menu Info Menu to display current information about the heating system, e. g. heating, hot water
Menu Settings Menu with general settings, e. g. language, time/date, formats
8 – Units line Physical units for the displayed values, e. g. in the “Information” menu. The following
units can be shown: ( )
Table 3 Symbols on the display
Recirculation
6 720 811 158-02.2O
12:31
Tu
man
auto
1
6
42 3
5 8
7
1
3
To Next Page
Loading...
