EasyManua.ls Logo

Bosch CRC200 - Page 8

Bosch CRC200
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 720 821 652 (2017/05) CRC200
8 | Getting started
Auto mode
Notice: Continued from page 7.
Press the dial to open the Temperatures menu.
Turn the dial to select the menu item Heating or Setback and press the dial.
The current setting appears and flashes.
Turn the dial to set the desired room temperature for the selected operating mode and
press the dial.
The setting value stops flashing. The user interface operates with the modified
settings.
If you require a room temperature for a period of time which deviates from the temperatures set for heating or setback: Activate
manual operation and set the required room temperature
Manual operation
Press the man key.
The user interface will now constantly maintain the set temperature entered for
manual operation.
Wait a few seconds until the default display appears again or press the dial twice.
Turn the dial to set the desired room temperature and press the dial (or wait a
few seconds).
The setting value stops flashing. The user interface operates permanently and for an
unlimited period of time with the modified setting (without setback).
If you are too cold or too warm during the transition time (Spring and Fall), adapt the: temperature threshold for summer shut-
off ()
Auto mode and manual operation
Press the menu key to open the main menu.
Turn the selector to highlight the Heating menu.
Press the selector to open the Heating menu.
Turn the selector to select the Summer/Winter menu item, and press the selector.
The current setting appears and flashes.
If desired, turn the dial to set by Outdoor Temp, and press the selector.
Turn the dial to select the menu item Temp.thresh. and press the selector.
The current setting appears and flashes.
Turn the selector to set the outdoor temperature for automatically turning on or off the
heating, and press the selector occurred.
The setting value stops flashing. The user interface operates with the modified
settings.
Operation Result
Table 4 Getting started – Room temperature
6 720 811 158-07.1O
Setback
Setback
6 720 811 158-08.1O
Set Room Temp
Set Room Temp
6 720 811 158-36.1O
Summer/Winter
Summer/Winter
6 720 811 158-10.1O
Temp.thresh.
Temp.thresh.

Other manuals for Bosch CRC200

Related product manuals