Need help?Do you have a question about the Bosch CS LD 1.0 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | CS LD 1.0 |
| Category | Security Sensors |
| Language | English |
Details warning notices structure, meaning, and symbols within the documentation.
Defines the qualified personnel required to operate the CS LD 1.0.
Outlines the warranty period, conditions, and exclusions for the product.
Covers environmental conditions, cleaning, repair, battery handling, and charging safety.
Explains the primary use of the CS LD 1.0 in detecting refrigerant leaks.
Lists the items included in the product package.
Provides a visual and component breakdown of the CS LD 1.0 leak detector.
Outlines initial setup procedures including unpacking, inspection, and charging.
Explains how to adjust and understand the device's sensitivity and operational modes.
Details the automatic and manual calibration and reset functions for leak detection.
Instructions on how to effectively locate refrigerant leaks using the device.
Explains how the device indicates the magnitude of a detected leak.
Describes how to control the audio alerts and alarms on the device.
Information on using the graphical mode to pinpoint small leaks.
Explains the power-saving feature that automatically turns off the device.
Information regarding the sensor filter, its replacement, and related messages.
Details on the sensor, its connection, and troubleshooting steps like reseating or replacement.
Explains the message displayed when the sensor is saturated and the clearing process.
Instructions on how to charge the device's internal lithium-ion battery.
Visual guide explaining the device's interface flow from power-on to steady state.
Explains various warning and status messages displayed on the CS LD 1.0 screen.
Details requirements for transporting the device, including battery regulations and packaging.
Covers the environmentally responsible disposal of the device according to European guidelines.
Presents test results for the CS LD 1.0 according to the EN 14624:2020 standard.
To Next Page