F 002 DG9 H12 | Bosch Automotive Service Solutions GmbH 2021-04-08
Maintenance | CS LD 1.0 | 47 | en
A
50%
Fig. 20: Steady state display with
charger connected
7.4.4 Battery temperature
warning message
! Disconnect the charging cable
immediately if the following
message, see Fig. 22, is dis-
played on the screen. Failure to
disconnect and cease charging
when this warning appears
could result in fire, explosion
and serious damage or injury!
Fig. 21: Battery temperature warning
message
! If this message appears, the
unit should remain disconnec-
ted until both the unit and the
charger return to ambient tem-
perature. Allow a minimum of
three (3) hours before attempt-
ing to reconnect charger.
! If the message re-appears, con-
tact Bosch Customer Service.
To Next Page
Loading...
