DINION capture 5000/7000 Installing the DINION capture | en 27
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
To disable Automatic Mode Switching:
1. Navigate to the Install menu for the license plate camera.
Refer to Section 4.1 Menus, page 28.
2. Navigate to the Alarm I/O menu.
3. Select None for the Input Action option. Refer to
Section 4.6.3 Alarm I/O submenu, page 47.
NOTICE!
Shutter can also be changed to adjust plate brightness. Shutter
is fixed at 1/5000 from the factory and should be changed only
by an experienced user. Changing the shutter speed affects
maximum capture speed of the vehicle and ambient rejection
ability.
To Next Page