Bosch DINION 5000 - Day;Night Submenu; (Overview Camera - DINION Capture 7000 Only)

DINION capture 5000/7000 Configuration | en 39
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
4.5.4 Day/Night submenu (Overview Camera - DINION
capture 7000 only)
Item Selection Description
Day/Night Auto, Color,
Monochrome
Auto - the camera switches the IR cut-
off filter on and off depending on the
scene illumination level.
Monochrome - the IR cut-off filter is
removed, giving full IR sensitivity.
Color - the camera always produces a
color signal regardless of light levels.
Switch level -15 to +15 Sets the video level in Auto mode at
which the camera switches to
monochrome operation.
A low (negative) value means that the
camera switches to monochrome at a
lower light level. A high (positive) value
means that the camera switches to
monochrome at a higher light level.
Priority Motion, Color In AUTO mode:
Color - the camera gives a color image
as long as the light level permits.
Motion - the camera avoids motion blur
as long as the light level permits (it
switches to monochrome earlier than it
would with Color priority).