Bosch DSA E-Series (E2700) - Ethernet Network Interface Cards for the E2700 Controller-Drive Tray

80 pages

Save Page as PDF

To Next Page

To Previous Page

DSA E-Series (E2700) Ethernet network interface cards for the E2700 controller-drive tray | en 21

Bosch Sicherheitssysteme GmbH Installation manual 2015.10 | V2 | DOC

5 Ethernet network interface cards for the E2700

controller-drive tray

The E2700 controller-drive tray supports a two-port 10-Gb/s iSCSI Base-T HIC host interface

cards.

Main Page

Table of Contents3
Safety5
Safety Message Explanation5
Safety Precautions5
Important Safety Instructions5
Warning Notices7
Caution Notices9
Notices9
About this Guide11
Registering for E-Series12
Preparing for an E2700 Controller-Drive Tray Installation13
Key Terms13
Gathering Items13
Basic Hardware13
E2700 Configuration Cables and Connectors14
Tools and Other Items15
Things to Know - Copper Cables and Sas Cables15
Things to Know -Taking a Quick Glance at the Hardware in a E2700 Controller-Drive Tray16
Ethernet Network Interface Cards for the E2700 Controller-Drive Tray21
Installing the E2700 Controller-Drive Tray22
Things to Know - General Installation22
Procedure - Installing the E2712 Controller-Drive Tray22
Procedure - Installing Drives in the E2712 Controller-Drive26
Connecting the E2700 Controller-Drive Tray to the Hosts27
Key Terms27
Things to Know - Storage Array Configuration Specifications for the E2700 Controller27
Things to Know - Host Channels27
Procedure - Connecting the Controller-Drive Tray to the Expansion Drive Trays29
Connecting to the Network31
Connecting to the Management Hosts31
Installing the Drive Trays for the E2700 Controller-Drive Tray Configurations33
Things to Know - General Installation of Drive Trays with the E2700 Controller-Drive Tray33
Procedure - Installing the DE1600 Drive Trays33
Procedure - Installing Drives in the DE1600 Drive Trays37
Procedure - Installing the DE6600 Drive Tray38
Procedure - Installing Drives on the De6600 Drive Tray45
Things to Know - Connecting the Power Cords47
Procedure - Connecting the Power Cords48
Connecting the E2700 Controller-Drive Tray to the Drive Trays49
Key Terms49
Things to Know - E2700 Controller-Drive Tray49
Things to Know - Drive Trays50
Things to Know - Drive Tray Cabling Configurations for the E2712 Controller-Drive Tray50
Connecting the Ethernet Cables53
Key Terms53
Things to Know - Connecting Ethernet Cables53
Procedure - Connecting Ethernet Cables53
Connecting the Power Cords54
Things to Know - AC Power Cords54
Procedure - Connecting AC Power Cords54
Turning on the Power and Checking for Problems in an E2700 Controller-Drive Tray55
Procedure -Turning on the Power to the Storage Array and Checking for Problems in a55
Things to Know -Leds on the E2712 Controller-Drive Tray56
Things to Know - General Behavior of the Leds on the Controller-Drive Tray60
Things to Know - Service Action Allowed Leds62
Things to Know -Leds on the DE6600 Drive Tray63
Leds on the DE6600 Drive Drawers66
Leds on the DE6600 Drives67
General Behavior of the Leds on the Drive Trays67
Things to Know -Seven Segment Display Sequence Code Definitions on the E270069
Controller-Drive Tray69
Things to Know -Seven Segment Component Failure Identifications for the E270069
Things to Know - Lock-Down Codes for the Controller-Drive Tray70
Things to Know - Seven-Segment Display Use Cases72
Things to Know - Seven-Segment Display for the Esms on the Drive Trays74
Regulatory Compliance Statements75
Trademark Information76
Additional Documentation77

Bosch DSA E-Series (E2700) - Ethernet Network Interface Cards for the E2700 Controller-Drive Tray

Table of Contents