56 en | Turning on the power and checking for problems in an E2700 controller-drive tray configuration DSA E-Series (E2700)
2015.10 | V2 | DOC Installation manual Bosch Sicherheitssysteme GmbH
12.2 Things to know –LEDs on the E2712 controller-drive tray
The following topics provide information about the LEDs found on the E2712 controller-drive
tray.
LEDs on the left end cap
Location LED Color On On
1 Controller-drive
tray locate
White Identifies a controller-drive tray that
you are trying to find.
Normal status.
2 Service action
required
Amber A component within controller-drive
tray needs attention.
Normal status.
3 Controller-drive
tray over-
temperature
Amber The temperature of the controller-drive
tray has reached an unsafe level.
Normal status.
4 Power Green Power is present. Power is not present.
5 Standby power Green The controller-drive tray is in Standby
Power mode.
The controller-drive tray is
not in Standby Power
mode.
LEDs on the drive
To Next Page
Loading...