– An output relay is activated.
–
Monitor A can switch to a multiscreen view if more than one alarm occurs. The latest
alarm status message is always shown.
Background events
Triggers and alarms can change background tasks that a user may not notice. Unit responses
that are not visible to the user are, for example, a change in recording speed, the activation of
the output relay, and event logging (see Log, page 104). The unit can also be configured to
record upon the activation of an alarm input. A trigger may change the way the camera images
are displayed on the monitors without requiring intervention.
DIVAR 3000/5000 Digital Video
Recorder
Operating instructions | en 109
Bosch Security Systems Operator Manual 2013.05 | 1.0 | DIVAR 3000/5000 Digital Video
Recorder
To Next Page
Loading...
