After setting values in the “Encoder” or “Schedule” screen for channel 1, click <Copy> to go to
the Copy screen. See following figure.
1.
You see the currently copied channel name is highlighted (in this example, channel 1).
2. Now select the channel(s) you want to paste to, such as channel 5, 6 and 7. (If you want
to save the current setup of channel 1 to all channels, click the box All.)
3. Click <OK> to save the copied setup.
4. Click <OK> in the Encoder or Schedule screen to complete the copy function.
42 en | Configuration
DIVAR 3000/5000 Digital Video
Recorder
2013.05 | 1.0 | DIVAR 3000/5000 Digital Video
Recorder
Operator Manual Bosch Security Systems
To Next Page
Loading...
