9
5. Scope of delivery
See also picture section (Fig. 1), page 22.
- Pressure loss gauge
- High-pressure test hose
- TDC calibrating unit (top dead centre locator)
- Calibrating nozzle for adjusting tester
- Operating Instruction
6. Special accessories
See also picture section (Fig. 2-9), page 23.
Connection (Thread M 18x1,5) 1 683 350 036
(Fig. 2)
Dieselengine connection set 1 687 010 016
(Thread M 18x1,5 / M 24x2)
(Fig. 3)
Connection (Thread M 12x1,25) 1 683 356 117
for DB-Lkw Diesel engine (60ZDE 29 LA)
(Connecting kit 1 687 010 016 is required)
(Fig. 4)
Connection (Thread M 14x1,25, conical seat) 1 683 373 064
for B 27 engine (Volvo)
(Fig. 5)
Connection for conical seat 1 683 373 065
(Thread M 18x1,5, conical seat)
(Ford 2.0 l, 4 cylinder in–line engine)
(Fig. 6)
Connection (Thread M 12x1,25) 1 683 350 069
e.g. for motorcycles
(Fig. 7)
Connection (Thread M 12x1,25) DB 617 589 0321
DB-Pkw Diesel engine
(without figure)
Connection (Thread M 14x1,25 x 25) 1 683 373 076
For HR7MPP spark plugs
(e.g. for Ford Fiesta, 1.25 l, 4 cylinders)
(Fig. 8)
Connection (Thread M 10x1,0) 1 683 373 080
For motorcycles and outboard engines
(Fig. 9)
7. Spare and wearing parts
Photo Order number Designation
1 1 685 100 031 Housing, Rubber protector
1/2 1 683 481 026 Knurled Thumbscrew
1/3 1 686 409 007 Female Hose coupling
1/5 1 680 712 184 Hose (M14x 1,25) (<)
1/- 1 900 210 108 O-ring (for Pos.1/5) (<)
1/6 1 680 363 036 Test Connection
1/7 1 688 132 025 TDC Calibrating Unit
1/- 1 680 706 008 Sight Glass (for Pos. 1/7)
1/- 1 680 306 022 Rubber Plug (for Pos. 1/7) (<)
1/- 1 680 707 065 PVC Hose 5x1,5, 80 cm
(for Pos. 1/7) (<)
< = wearing part