6 720 800 844 (2012/02)
Installation (for contractors only) | 13
3.1.2 Wall mounting
The control quality of the controller is dependent
on where it is installed.
The installation location (= lead room) must be
suitable for controlling the heating.
B Select the installation location.
Fig. 8
B Remove the top section and slide cover from
the base.
Fig. 9
B Fit the base.
Fig. 10
B Make the electrical connections (Æ Fig. 14 or
15 on page 16).
B Refit top section an slide cover on base.
Fig. 11
The mounting surface on the wall
should be level.
6 720 612 481-03.1R
0,3 m0,3 m
1,2 - 1,5 m
0,6 m
119 mm
134 mm
35 mm
1.
2.
3.
6 720 612 220-27.1J
6 720 645 340-07.1O
6 mm 3,5 mm6 mm
3.
2.
1.
6 720 612 220-06.1R
To Next Page
Loading...
