Bosch FW 120 - Display Views and Menu Navigation

6 720 800 844 (2012/02)
20 | Operation
5.2 Display views and menu
navigation
The user interface of the weather- compensation
controller FW 120 is implemented as a menu
system. Within that menu, the various functions
are arranged in a hierarchical structure. For
greater clarity, the menu is subdivided into three
sections (MAIN MENU, INFO, INSTALLER
SETTINGS). Each section can be accessed by its
own button. For the entire menu tree, see
chapters 6.1, 7 and 8.1.
To navigate through the menu:
• Press to open MAIN MENU. From any
point within the MAIN MENU, press to
go back to the standard display.
• Press to open the INFO menu. From any
point within the INFO menu, press to go
back to the standard display.
• Hold down for at least 3 seconds to open
the INSTALLER SETTINGS menu. From any
point within the INSTALLER SETTINGS menu,
press to go back to the standard display.
• The selected menu point/parameter is
displayed in colours, i.e. white on
black.
• Arrows in the left margin indicate that there is
more information than can be shown on the
display at once. It can be viewed with .
• opens the submenu associated with the
selected menu point/parameter or activates
editing mode for the parameter (the
parameter setting starts flashing).
• A flashing parameter setting (e.g. switching
time or operating mode)
– can be changed with .
– can be deleted (reset to the default) with
.
– is stored with .
– remains unchanged if any other key apart
from is pressed.
• To return to the next menu up from a
submenu:
– Highlight menu point and
confirm with , or
– press .
menu
menu
info
info
menu
menu
i
n
f
o
inverse