Bosch GCM18V-07S - Cutting Capacities

-15-
Cutting Capacities
Key Moldings / Positioning Maximum Size
Base Molding Against Fence * 3-1/2” (89 mm)
38° Crown Molding Angled Against Fence * 3-5/8” (92 mm)
45° Crown Molding Angled Against Fence * 3-3/4” (95 mm)
Crown Molding Flat on Table 8-1/4” (210 mm)
* Within miter range of 0° to 47° Left
Miter / Bevel Maximum Height
0°/ 0° 2-1/8” (54 mm)
45°/ 0° 2-1/8” (54 mm)
0°/ 45° (Left) 1-1/2” (38 mm)
Miter / Bevel Maximum Width
0°/ 0° 8-1/4” (210 mm)
45°/ 0° 5-3/4” (146 mm)
0°/ 45° (Left) 8-1/4” (210 mm)
16099221PK GCM18V-07S OSI 20220506.indd 15 5/6/22 11:27 AM