Bosch GCM18V-07S - Unpacking and Checking Contents

-16-
Unpacking and Checking Contents
Unpacking the Miter Saw
To avoid severe pinching,
never lift or move this saw
by gripping any component of the mechanism
support system.
When removing this tool from packaging materi-
als, reach down to the two side carry-handle lo-
cations and slowly lift until it clears the package.
Checking Contents in Package
Open the top of the package and look for the
included loose parts (Fig. 4).
Some small parts must be attached to the tool
before it is ready for use.
Loose Parts
2 Workpiece Clamps
(40)
Torx Wrench (39)
Dust Bag (32)
Operating/Safety
Instructions
Check off each part.
Fig. 4
16099221PK GCM18V-07S OSI 20220506.indd 16 5/6/22 11:27 AM