-14-
Intended Use
Use this miter saw only as
intended. Unintended use
may result in personal injury and property dam-
age.
This product is intended to
cut wood, wood-like prod-
ucts, and non-ferrous metals. Dust build-up
around the lower guard and hub from other ma-
terials (masonry or ferrous metal) may disable
the lower guard operation.
Cutting Masonry/Metal
Do not cut ferrous metal or
masonry with this miter
saw. The dust from the ferrous metal or mason-
ry cutting will cause the lower guard to become
sluggish and may not close fully and quickly af-
ter cutting these materials.
Do not use abrasive wheels.
This tool is not intended for
usage with metal or masonry cut-off wheels.
Do not use Wet Diamond
cutting off wheel or water
feed devices with this miter saw. Masonry cut-
ting waste will enter the lower guard system,
harden and cause the guard to become inoper-
able. Use of water in masonry cutting applica-
tions with an electric miter saw will cause elec-
tric shock hazards.
This tool is not intended for usage with metal or
masonry cut-off wheels.
Specifications
Voltage: 18 V
Allowed ambient temperature:
– during charging
– during operation
– during storage
32…113 °F (0…+45 °C)
-4…122 °F (-20…+50 °C)
32…122 °F (0…+50 °C)
Battery Packs/Chargers
Please refer to the battery/charger list, included with your tool.
GCM18V-07S Cordless Miter Saw
16099221PK GCM18V-07S OSI 20220506.indd 14 5/6/22 11:27 AM
To Next Page
Loading...
