-21-
Assembly
NOTE: Clean the bag at the end of the cutting
session and before transporting or storing the
saw.
Attaching a Vacuum Cleaner/Dust
Extractor
The saw’s dust port (Fig. 12, 41) will accept
the typical nozzles from 35 mm (13/8”) vacuum
cleaner hoses, and Bosch VH–Series hoses.
To connect the saw with a 1¼” (32 mm) or 1½”
(38mm) hose, the Bosch VAC024 adapter can be
used (sold separately).
NOTE: the sizes above indicate the hose diam-
eters and not the nozzle diameters.
Attaching to Vacuum – Insert the vacuum noz-
zle into (or onto) the dust port (Fig. 12, 41) as
far as it will go. Check to see that the vacuum
hose is free from the mechanism and cutting
path before reconnecting battery pack.
Fig. 12
1
3
/
8
˝ (35mm)
hose
1
1
/
4
˝ (32mm)
hose
VAC024
1
1
/
2
˝ (38mm)
hose
Bosch VH-series
hose
41
16099221PK GCM18V-07S OSI 20220506.indd 21 5/6/22 11:27 AM
To Next Page
Loading...
