16
Unpacking And Checking Contents
Unpacking the Miter Saw – When remov-
ing this tool from packaging materials,
reach down to the two side carry-handle lo-
cations and slowly lift until it clears the
package.
To avoid severe pinch-
ing, never lift or move
this saw by gripping any component of the
mechanism support system.
This symbol is placed at various lo-
cations on the tool to warn the user
of pinch-point areas.
Checking Contents in Package – Open the
top of the package and look for the in-
cluded loose parts. Refer to the diagram
below.
Some small parts such as the bevel lock
lever and miter lock knob require attach-
ment to the tool before it is ready for use –
See “Attaching Loose Parts” on page 18.
To Next Page
Loading...
