15
Cutting Capacities
Specifications
Voltage
18 V
Allowed ambient temperature:
– during charging
– during operation
– during storage
32…113 °F (0…+45 °C)
-4…122 °F (-20…+50 °C)
32…122 °F (0…+50 °C)
Cordless Miter Saw GCM18V-12GDC
Battery Packs/Chargers
Please refer to the battery/charger list, included with your tool.
Intended Use
Use this miter saw only as
intended. Unintended use
may result in personal injury and property dam-
age.
Connectivity Module (sold separately)
Please refer to the operating/safety instructions, included with connectivity module.
Key Moldings / Positioning Maximum Size
Base Molding Against Fence
7-1/4" (185mm) from 47° Left to 31.6° Right
4" (100mm) from 31.6° Right to 60° Right
38° Crown Molding Angled Against Fence* 5-1/2" (140mm)
45° Crown Molding Angled Against Fence* 6" (152mm)
Crown Molding Flat on Table 11-1/2" (292mm)
* Within miter range of 0° to 47° Left
Miter / Bevel Maximum Height x Width
0°/ 0° 3-1/2" x 13-1/2" (89mm x 343mm)
0°/ 0° with 3/4" (19 mm) table spacer 2-7/8" x 15" (73mm x 381mm)
45°/ 0° 3-1/2" x 9-1/2" (89mm x 241mm)
0°/ 45° (Left) 2" x 13-1/2" (50mm x 343mm)
0°/ 45° (Right) 1-1/2" x 13-1/2" (38mm x 343mm)
45°/ 45° (Left) 2" x 9-1/2" (20mm X 241mm)
45°/ 45° (Right) 1-1/2" x 9-1/2" (38mm X 241mm)
To Next Page
Loading...
