24 en | Camera MIC IP ultra 7100i │ MIC IP starlight 7100i
2020-11 | 1.4 |
User Manual
Bosch Security Systems
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Note: To restore the default setting of all scene modes, you must click the SC setting.
Restore mode defaults
Click Restore Mode Defaults to restore the factory default modes. Confirm you decision.
5.2.1 Color
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
– Basic auto mode allows the camera to continually adjust for optimal color reproduction
using an average reflectance method. This is useful for indoor light sources and for
colored LED light illumination.
– Standard auto mode allows the camera to continually adjust for optimal color
reproduction in an environment with natural light sources.
– Dominant color auto mode takes into account any dominant color in the image (for
example, the green of a football pitch or of a gaming table) and uses this information to
obtain a well balanced color reproduction.
– In Manual RGB mode, the Red, Green, and Blue gain can be set manually to a desired
position.
Click Hold to put ATW on hold and save the current color settings. The mode changes to
manual.
The table below identifies the options available in the field White balance and the additional
fields that appear depending on the options selected.
Option in field “White
balance”
Additional
Input field
Additional fields for
configuration
NOTES
Basic auto RGB-
weighted
white
balance
R-weight
G-weight
B-weight
The 3 “-weight” fields appear
only when the option in the field
“RGB-weighted white balance”
is On.
Standard auto RGB-
weighted
white
balance
R-weight
G-weight
B-weight
Sodium lamp auto RGB-
weighted
white
balance
R-weight
G-weight
B-weight
Dominant color auto RGB-
weighted
white
balance
R-weight
G-weight
B-weight
To Next Page
Loading...
