Bosch MIC IP ultra 7100i - Picture Settings for Image Optimization

MIC IP ultra 7100i │ MIC IP starlight 7100i Camera | en 25
Bosch Security Systems
User Manual
2020-11 | 1.4 |
Option in field “White
balance”
Additional
Input field
Additional fields for
configuration
NOTES
Manual R-gain
G-gain
B-gain
RGB-weighted white balance
In an auto mode, RGB-weighted white balance can be switched On or Off. When On,
additional fine tuning of the automatic color reproduction can be made with the R, G and B
weight sliders.
R-weight
When White balance is in an auto mode, and RGB-weight white balance is On, this field
appears. Adjust the slide for red-gain weight (from -5-0 to +50, with 0 as the default).
Reducing red introduces more cyan.
G-weight
When White balance is in an auto mode, and RGB-weight white balance is On, this field
appears. Adjust the slide for green-gain weight (from -5-0 to +50, with 0 as the default).
Reducing green introduces more magenta.
B-weight
When White balance is in an auto mode, and RGB-weight white balance is On, this field
appears. Adjust the slide for blue-gain weight (from -5-0 to +50, with 0 as the default).
Reducing blue introduces more yellow.
R-gain
In Manual RGB white balance mode, adjust the red gain slider to offset the factory white point
alignment (reducing red introduces more cyan).
G-gain
In Manual RGB white balance mode, adjust the green gain slider to offset the factory white
point alignment (reducing green introduces more magenta).
B-gain
In Manual RGB white balance mode, adjust the blue gain slider to offset the factory white
point alignment (reducing blue introduces more yellow).
5.2.2 Picture Settings
Color
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
– ATW: allows the camera to adjust color reproduction continuously.
– AWB hold: places the ATW on hold and saves the color settings.
– Extended ATW (default): allows the camera to adjust constantly for optimal color
reproduction.
– Manual: Red and Blue gain can be set manually to a desired position.
– Sodium lamp auto: Automatically adjusts for sodium vapor light to restore objects to
their original color.
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).