Bosch Security Systems | 2006-06 | 9922 141 10377 en
Plena Voice Alarm System | Installation and User Instructions | Configuration en | 74
16 Introduction
A number of functions of the Plena Voice Alarm System
is hardware configured using, for example, DIP switches
and volume controls. Other parts of the system must be
software configured using the Plena Voice Alarm
System configuration software. A description of this
software is beyond the scope of the Installation and
User Instructions. The Installation and User Instructions
only describe the hardware configuration of a Plena
Voice Alarm System.
It is recommended to do the hardware configuration of
the system before the software configuration.
Note
See the Configuration Software Manual
(9922 141 1038x) for more information about
the configuration software.
To Next Page
Loading...
