Bosch Plena - Making Announcements and Distributing Alert;Alarm Messages

Bosch Security Systems | 2006-06 | 9922 141 10377 en
Plena Voice Alarm System | Installation and User Instructions | Operation en | 94
To select all zones, push the All call button on the front
panel of the voice alarm controller or the remote
controls (see figure 27.9)
27.5.4.3 Start the alert message
Push the Alert message button on the front of the voice
alarm controller or the remote controls to distribute the
the default alert message (see figure 27.10). The message
is only distributed to the selected zones (see 27.5.4.2).
•If the red Alert message indicator is off, the alert
message is not distributed. Push the Alert message
button to distribute the default alert message.
•If the red Alert message indicator is on, the message
is distributed. Push the Alert message button to stop
distributing the default alert message.
27.5.5 Distribute the alarm message
Distributing the default alarm message is similar to
distributing the default alert message (see section
27.5.4). Push the Alarm message button instead of the
Alert message button (see figure 27.11). The alarm
message can also be distributed by pushing the Alarm
Message button on the fireman’s panel.
figure 27.9: All call button
figure 27.10: Alert message button
Indicator test
EMG mic
All call
Alert message
Alarm message
Indicator test
EMG mic
Alarm message
All call
Alert message
figure 27.11: Alarm message button
Indicator test
EMG mic
All call
Alert message
Alarm message