RE 15300-WA, Version 06.2021, Bosch Rexroth AB
Transport and storage 15/72
DANGER
Danger while transporting or lifting Hägglunds motors due to heavy weight!
Danger to life, risk of injury or serious injuries and risk of damage to equipment!
▶ Make sure that lifting device is correctly installed and are approved for the
total weigth of motor and mounted accessories
▶ Do not stand under suspended load.
Danger if using wrong lifting eyes!
Danger to life, risk of injury or serious injuries and risk of damage to equipment!
▶ Make sure the correct lifting eye is used, see Fig. 4: and Table 5.
Fig. 3: Center of gravity
DD00095111
Table 5: Tightening torque for lifting eyes
Table 4: Necessary and supplementary documentation Center of gravity
Fig. 4: Lifting eyes at motor
DD00056573
B)
A)
Position A) valid for CBm 2000-4000
Position B) valid for CBm 5000-6000
Motor type
Screw dimension Number of screws Tightening torque
Nm Ibf⋅ft
CBm 2000 to CBm 4000 M24 4 400 295
CBm 5000 to CBm 6000 M36 4 800 590
6 Transport and storage
6.1 Product transport
6.1.1 Lifting methods
A
A
Measure A
Splines Shrink disc coupling
Motor Ø 360 Ø 340
CBm 2000 445 mm 17.52 in 608 mm 23.9 in 571 mm 22.5 in
CBm 3000 502 mm 19.76 in 671 mm 26.4 in — —
CBm 4000 555 mm 21.85 in — — — —
CBm 5000 630 mm 24.80 in — — — —
CBm 6000 690 mm 27.17 in — — — —
To Next Page
Loading...
