Bosch Rexroth Hagglunds CBm - Single Ended Torque Arm Installation

RE 15300-WA, Version 06.2021, Bosch Rexroth AB
Installation 29/72
+
For spline shaft
(spline motor)
Mounting kit
Torque arm
For plain shaft on
driven machine
(coupling motor)
Torque arm
Fig. 21: Single ended torque arm mounting at spline shaft, only
allowed for CBm 2000 to CBm 4000 (Not allowed for CBm 5000
to CBm 6000)
Fig. 22: Single ended torque arm mounting for plain shaft (Only
for CBm 2000 and CBm 3000 coupling version)
7.4.2 Single ended torque arm installation
The single ended torque arm is tted to the motor before the motor is mounted on
the driven shaft. See 7.4.1: Fitting the torque arm on the motor, Fig. 18.
Torque arm Motor type B C Weight
mm in mm in kg lb
TC A 2000 CBM 2000 2 000 78.74 580 22.83 445 981
TC A 4000
CBM 3000 to CBm
4000
3 000 118.11 690 27.17 875 1 929
B
C
Table 8: Dimensions torque arm TC A
Fig. 23: Single ended torque arm TC A
DD00077363