26/72 Installation
Bosch Rexroth AB, RE 15300-WA, Version 06.2021
Fig. 17: Mounting CBm motor with assembly tool
1
Coupling adapter
or driven shaft with
spline or plain shaft
2
Assembly tool
DD00060385
3
4
Assembly tool motor
1 Tie rod
2 Washer
3 Nut
4 Dismantle tool and screws
(used for motor removal)
7.3.3 Assembly tool for motor
For easier and faster mounting of the CBm motor on the coupling adapter or driven
shaft, a special assembly tool can be used. The assembly tool is passed through
the motor and screwed into the pre made thread in the coupling adapter or driven
shaft. The motor is pulled onto the shaft by turning the nut on the assembly tool.
Material ID Assembly tool for CBm motor:
Material ID R939003866
To Next Page
Loading...
