Bosch Rexroth Hagglunds CBm - Personnel Qualifications; General Safety Instructions

8/72 Safety instructions
Bosch Rexroth AB, RE 15300-WA, Version 06.2021
• Extension or conversion is not permissible and has to be approved by contact at
Bosch Rexroth.
• Using the Radial piston motor under water without necessary additional measures.
• Using the Radial piston motor when the exterior pressure is greater than the
interior pressure (case pressure).
• Using the Radial piston motor in explosive environments unless the component
or machine/system has been certied as compliant with the ATEX directive
2014/34/EU
• Using the Radial piston motor in an aggressive atmosphere without necessary
additional measures
2.4 Personnel qualication
The work steps described in the present documentation require basic skills in
mechanical, electrical and hydraulic knowledge, as well as knowledge of the
associated technical terms. In order to ensure safety at work, these jobs must be
exclusively carried out by qualied technical personnel or by trained staff under
the direction and supervision of qualied personnel.
For transporting and handling of the product, additional knowledge is necessary
with regard to working with a lifting device and the corresponding attachment
equipment. In order to ensure safe use, these activities may therefore only be
carried out by appropriate qualied personnel or a trained person under the
direction and supervision of qualied personnel.
Qualied personnel are in a position to recognize possible hazards and institute
appropriate safety measures thanks to their professional training, knowledge and
experience, as well as their understanding of the relevant conditions pertaining to
the work to be done. Qualied personnel must observe the subject-specic rule
and have the necessary hydraulic knowledge.
Hydraulic knowledge means, for instance:
• reading and fully understanding hydraulic diagram,
• fully understanding in particular the interrelationships regarding safety devices
and having knowledge on the function and assembly of hydraulic components.
Bosch Rexroth offers training support for special elds. For more information
about training, please contact your Bosch Rexroth representative.
2.5 General safety instructions
• Observe the regulations for accident prevention and environmental protection.
• Comply with the local safety provisions and regulations of the country in which
the product is used.
• Make sure to use Rexroth products in perfect working order.
• Strictly observe all instructions on the product.
• Persons, who assemble, operate, disassemble or maintain Rexroth products must
not consume any alcohol, drugs or pharmaceuticals that may affect their ability
to respond.
• Use exclusively accessories and spare parts explicitly approved by the
manufacturer (genuine Bosch Rexroth spare parts) to avoid accidents due to
improper accessories and spare parts.
• Strictly observe the technical data and ambient conditions specied in the
product documentation.