Bosch Rexroth Hagglunds CBm - 7.4.8 Port Connections and 7.4.9 Rotation Direction

54/72 Installation
Bosch Rexroth AB, RE 15300-WA, Version 06.2021
Fig. 55: Connection side of the motor
7.4.8 Port connections
When using (thick wall) piping and in applications with frequent reversal of
rotation direction, it is recommended to t exible hoses between the motor and
piping to avoid damage due to vibration and to simplify installation of the motor. The
length of the hoses should be kept as short as possible.
Fig. 56: Shaft side of the motor
T8
T1 D1T7T1A1
A2
T3
C1D3
C2
T6
F2
C3
A3
D4T7
T4CC4
A4T4AT7D2
C5
A5
T3
T6
T5
C6
A6
T2
Rotation flow inlet
C1 - C6
Rotation flow inlet
A1 - A6
DD00058251
DD00058253