Bosch Rexroth Hagglunds CBm - Page 47

RE 15300-WA, Version 06.2021, Bosch Rexroth AB
Installation 47/72
Fig. 47: Fix the spline motor with the mounting kit, horizontal mounting
DD00060385
Coupling adapter
or driven shaft
3. Bearing holder
6. O-ring
1. Cover
2. Plug G 1¼
Key grip
Tie rod
Washer
Nut
(Dismantling tool
and screws,
not used at
mounting!)
Oil
Axial clearance
10 mm
4. Mounting kit
6. O-ring
(delivered with motor)
Spacer
5. Screw M30
1. Cover
Oil lling of spline
DD00058240
Spacer
Screw,
M30
Fig. 46: Mounting spline motor with assembly tool