ECODRIVE DKC02.1 Drive Controller About this documentation
DOK-ECODRV-DKC02.1****-PRJ2-EN-P
It supplies information on:
•
planning the mechanical control cabinet
•
planning the electrical system in the control cabinet
•
logistic handling of the equipment
•
preparing the resources for start-up
"ECODRIVE Servo drives DKC with MKD"
- Selection Lists -
DOK-ECODRV-DKC+MKD****-AUS1-EN-P
for selecting the motor/controller combination.
"MKD Digital AC Motors"
- Project Planning Manual -
DOK-MOTOR*-MKD********-PRJ2-EN-P
for a detailed description of the servomotors and for the selection of the
required cable.
"ECODRIVE DKC02.1 Drive Controller"
- Function Description -
DOK-ECODRV-SSE-02VRS**-FKB1-EN-P
for testing and selecting the functions.
"EMC in Drive and Control Systems"
- Project Planning Manual -
209-0049-4305-02 DOK-GENERL-EMV********-PRJ1-EN-P/04.96
for the EMC-compliant planning and installation of the drive system
(EMC= Electromagnetic Compatibility).
“Fiber Optic Cable - Handling”
- Applications -
209-0090-4101-05 DE/10.94
for planning the fiber optic transmission links and selecting the fiber optic
cables and FSMA plug-in connector.
What is this document for?
Supplementary documentation
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
