ECODRIVE DKC02.1 Drive Controller Table of contents III
DOK-ECODRV-DKC02.1****-PRJ2-EN-P
10 Planning the control cabinet 10-1
10.1 Notes on installing the control cabinet ............................................................................................. 10-1
Power dissipation........................................................................................................................10-1
10.2 Using heat-exchange units in the control cabinets .......................................................................... 10-2
10.3 Interference suppression measures and EMC ................................................................................ 10-4
11 Power connection 11-1
11.1 Direct power connection................................................................................................................... 11-1
11.2 Line contactor/fuse protector ........................................................................................................... 11-2
Calculating the phase current at the power connection.............................................................. 11-2
Selecting the fuse protector Q1 and line contactor K1................................................................ 11-3
11.3 Control circuit to the power connection............................................................................................ 11-4
11.4 Reaction of the drive to malfunctions............................................................................................... 11-6
Power failure ............................................................................................................................... 11-6
24 V control voltage failure for the DKC......................................................................................11-6
Fatal errors.................................................................................................................................. 11-7
Other errors................................................................................................................................. 11-7
11.5 Protection against indirect contact................................................................................................... 11-7
12 Preparing for Startup 12-1
Required equipment.................................................................................................................... 12-1
13 Condition of the drive components on delivery 13-1
Packaging ................................................................................................................................... 13-1
Accompanying documents.......................................................................................................... 13-1
14 Index 14-1
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
To Next Page
Loading...
