Bosch Rexroth Indramat ECODRIVE DKC02.1 Series - Page 75

ECODRIVE DKC02.1 Drive Controller Power connection 11-5
DOK-ECODRV-DKC02.1****-PRJ2-EN-P
AP5110D4.fh5
K1
Limit switch
E-stop
Power off
Power on
Control error
message
Mains contactor
External control +DC 24 V
1)
Integrate Bb contact of additional DKCs and BZM into the series connection
2)
E-Stop for additional DKCs on same mains contactor
3)
Switching capacity DC 24V/1A
4)
Use overvoltage limiter with diode combination
Bb
3)
X4/3 2)
X4/6
1)
K1
4)
E-STOP
DKC ready to operate
0V
Fig. 11-6: Principal control circuit to the DKC
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01