188/263 Bosch Rexroth AG | Tightening Technology 3 608 870 A47
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-
Scan options
The field is only displayed, if Scanner is selected as ID input source.
Barcodes
The field is only displayed, if Scanner is selected as ID input source. Activate the respective barcode
types.
9.5.3.4 End step
All modes end with the end step. The tool is disabled in this step.
Table 9–18: ID input step dialog - scan options panel
Element Description
Trigger scan process The laser beam of the barcode scanner can be activated using the start
switch or the function keys. This starts the scanning of the barcode. If the
PLC signal EnScan is present, the approval for this has to be present before-
hand.
– Play at start switch
– Center function key
–Function key Left
–Function key Right
– PLC signals
Laser on time Maximum time that the laser is turned on.
Acoustic signal If the checkbox is selected, an acoustic signal will resound after recognition
of a bar code.
Double clicking the end step or the respective icon opens the corresponding dialog for en-
tering the parameters.
To Next Page
Loading...
