Tightening Technology | Bosch Rexroth AG 89/263
7.3 Data output via HTTP
For transmission of results data via HTTP (Hypertext Transfer Protocol), the tightening controller estab-
lishes a connection to the HTTP server. Using the HTTP 1.1 protocol, one results data record is ex-
changed during each connection. After data transmission, the connection between the tightening system
and the server is not maintained. For transmission of additional results, the tightening controller establish-
es a new connection.
Fig. 7–1: Results data transfer via HTTP
As of Nexo firmware version 1200, data output via HTTP is supported.
The settings for data output are made via the NEXO-OS operating system in the
Settings Data Standard Nexo HTTP menu, see section Settings on page 203.
Tightening controller
Results data record via HTTP-POST
• HTTP header:
Host
User-Agent
Content-Type
Connection
Content-Length
• Results data record in configured
“Standard Nexo” format
HTTP server
Connection establishment
Confirmation with “200 OK”
Connection disconnection
To Next Page
Loading...
