3 608 870 A47 Tightening Technology | Bosch Rexroth AG 21/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
2.1.5 Maintenance and repair instructions
Perform the prescribed maintenance work at the intervals specified in the operating instructions for
the respective system component.
Make sure that no lines, connectors or components are disconnected as long as the system is under
pressure and voltage.
After the system is switched off, protect it from being switched on again.
2.1.6 Disposal instructions
Dispose of Rexroth products in accordance with the currently applicable regulations in your country.
2.2 Intended use
2.2.1 Introduction
Bosch Rexroth products are developed and manufactured in accordance with the latest state of technol-
ogy. They are checked for safe function before delivery.
The products may only be used as intended. If they are not used as intended, this may result in situations
that cause injuries and damage to equipment.
Before using any product from Bosch Rexroth, the following prerequisites must be fulfilled to ensure in-
tended use:
Anyone who deals with our products in any manner must read and understand the appropriate safety
instructions and information on intended use.
If dealing with hardware products, they must be kept in their original state, i.e. no modifications may
be made to them. Software products may not be decompiled and the source code may not be
changed.
Damaged or faulty products may not be installed or commissioned.
Before commissioning, ensure that the current firmware version (release or SP) is installed on the
controllers.
Make sure that the products have been installed in accordance with the specifications listed in the
respective documentation.
NOTE
Stable tool quality
Recommendation
To ensure stable tool quality, a machine capability test (MCT) should be carried out at regular
intervals.
The MCT should comply with VDE/VDI2645 Sheet 2.
Bosch Rexroth Service provides this service
As the manufacturer, Bosch Rexroth does not grant any warranty, assume any liability, or provide com-
pensation for damages caused by improper use of the products. The user is solely responsible for risks
caused by improper use of the products.
To Next Page
Loading...
