88/263 Bosch Rexroth AG | Tightening Technology
7.2.2 Data volume and expected transfer time for tightening results files
The data volume depends on the following criteria:
• Number of graph points configured in the tightening program
• Value range of graph parameters
• Number of tightening steps
• Number of active target and monitoring functions of the particular step
The biggest data volume is required saving the graph points: The following coarse guide value applies:
At least 10 bytes are required for each graph point.
A maximum of 2000 graph points therefore results in:
10 bytes x 2000 graph points x 3 graph types = 58 kbytes of graph point data
To Next Page
Loading...
