Bosch Rexroth Nexo - Page 216

216/263 Bosch Rexroth AG | Tightening Technology 3 608 870 A47
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-
File button
Click on the button to display the File dialog. In the dialog, the respective parameters for storage of results
data can be edited, deleted or additional memory parameters added.
Table 9–67: Memory dialog
Element Description
Output format Output format for results data.
–Type
Selection of the json output format.
– JSON-formatted
Select yes to display the results data in a readable JSON format (includ-
ing line breaks and spaces). Select no to receive an unformatted JSON
data set.
File name Display on selection of FTP, NX-SD card and File Share:
Under file name the file name for the saved results data file is defined. The
file name can be composed of different parameters. Activate the respective
parameters. Additional user-defined parameters can be added.
File extension Display on selection of FTP, NX-SD card and File Share:
Displays the file extension json of the saved results data file.
Sub-directory Display on selection of FTP, NX-SD card and File Share:
Under Sub-directory, a sub-directory is created. The file name of the sub-di-
rectory can be composed of different parameters. Activate the respective pa-
rameters.
Number of files Display on selection of NX-SD card:
On the applied file system of the NX-SD card, sub-directories can only con-
tain a defined number of files. Due to this restriction, an additional sub-direc-
tory with the current time stamp (YYYY-MM-DD_hh-mm-ss) is created in
the configured directory for storage of each results data set. If the configured
number of files is reached, a new sub-directory is automatically generated
with the current time stamp for storage of the results data.
A maximum of 10000 result data records per sub-directory can be stored.
Add Click Add to add a new parameter.
Click Save to save the changes or Cancel to discard the changed data.
Edit Click Edit to edit a memory parameter. Change the presettings and click
Save to save the changes or Cancel to discard the changed data.
Remove Click Remove to remove a parameter.
Move up / Move down Click Move up or Move down to change the order of parameters for compo-
sition of the file name of the sub-directory.
Save Click Save to save the edited data.
Discard
Click Discard to discard the edited data.
Basic settings All settings in this dialog are reset to the factory setting.