3 608 870 A47 Tightening Technology | Bosch Rexroth AG 229/263
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-05
Settings Quality code Rework codes
A rework code can be used to inform the user of the necessary steps to rework a tightening that has been
evaluated as NOK. The rework instructions can be output via appropriate control signals (RC0-4).
31 rework codes are provided internally. These codes can each be assigned a text (max. 80 characters).
The code is output as a binary encoded control signal.
On delivery of the Nexo cordless Wi-Fi nutrunner, the quality code assignment table does not contain any
assigned rework codes. A maximum of 31 rework codes can be defined. Code 0 is not defined
Save Click Save to save the edited data.
Discard Click Discard to discard the edited data.
Import Opens the Import dialog. Select the file to be imported.
Export Exports the current settings to the download area.
Restore defaults All settings in this tab are reset to the factory setting.
Table 9–80: Quality code tab - rework codes
Element Description
Save Click Save to save the edited data.
Discard Click Discard to discard the edited data.
Import Opens the Import dialog. Select the file to be imported.
Export Exports the current settings to the download area.
Table 9–79: Quality code tab - configuration of quality codes
Element Description
To Next Page
Loading...
