Bosch Rexroth Nexo - Page 62

62/263 Bosch Rexroth AG | Tightening Technology 3 608 870 A47
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-
NXA011S, NXA015S,
NXA030S, NXA050S
and NXA065S
Fig. 4–5: Torque support clamping area - NXA011S/NXA015S
Fig. 4–6: Torque support clamping area - NXA030S/NXA050S/NXA065S
Torque and minimum clamping width for the torque support on right-angle nutrunners:
• Clamp the torque support to the right-angle nutrunner inside the marked area, making sure that it fits
planar to the diameter of the nutrunner.
• Minimum clamping width: 12mm
• Tightening torque for clamping screws of size M6: 8 +1 Nm
NXP
Fig. 4–7: Torque support clamping area
A
20 mm
38 mm45 mm
Ø 35 mm
A
15 ... 19 mm
A