RE 30162-B/04.11 | SYHNC100-SEK...X Bosch Rexroth AG 31/44
Assembly
Description of the LEDs6.4.3
At the front side of the SYHNC100-SEK...3X unit, there are the following 3 LED
displays:
3.3 V: Voltage supply of the SYHNC100-SEK...3X is OK. •
RUN: •
SYHNC100-SEK...3X has been initialized and is in “RUN”. The LED
flashes if the SYHNC100-SEK...3X has not been initialized or is defective.
BUS: Field bus communication is OK. •
CANopen6.4.4
The CANopen interface as well as the operation of the SYHNC100-SEK...3X via
CANopen is described in detail in the online help.
CANopen interfaceFig. 9:
To Next Page
Loading...
