Bosch Rexroth SYHNC100-SEK 3 Series - Product Commissioning; First Commissioning Steps; WIN-PED 6.6 Commissioning Software

36/44 Bosch Rexroth AG SYHNC100-SEK...3X | RE 30162-B/04.11
Commissioning
Commissioning7
First commissioning7.1
NOTE
Uncontrolled connection or disconnection of plug-in connectors!
The device might be destroyed.
Before installation works, and before connecting or disconnecting plug-in
f
connectors to or from the device, the device must be disconnected from the
voltage supply or reliably de-energized.
Devices damaged due to incorrect installation are not covered by the
warranty.
Observe protection class, voltage supply and environmental conditions
f
according to data sheet RE 30139.
There are the following prerequisites for the functioning of the SYHNC100-SEK...3X:
The WINPED® 6.6 operating software has to be used. •
There must be an application project on the SYHNC100-SEK...3X. If no •
application project is available, please contact
support.ncsystems@boschrexroth.de.
The application project must also be available on the PC so that the •
SYHNC100-SEK...3X can be initialised and/or the parameterization and
diagnosis can be completed.
Further information on operation, project planning, programming and diagnosis
of the control system with WIN-PED® 6.6 is available in the help menus of the
program.
Commissioning software WIN-PED7.2 ® 6.6
For commissioning and for later operation, the user can apply the PC program
WIN-PED®. It can be used for the programming, setting and diagnosis of the
SYHNC100-SEK...3X. Functionality, menus and program windows are adjusted to
the variants of the SYHNC100-SEK...3X.
WIN-PED® offers the following functions:
Convenient dialog functions for the online or offline settings of the machine data •
Dialog window for the online setting of the parameter values •
Various options for the display of the process parameters, the digital inputs, •
outputs
Recording and graphic illustrations of up to 16 process parameters with a great •
choice of trigger options
The PC program WIN-PED® 6.6 is not included in the scope of delivery of the
VT-HNC100...3X. Download on the Internet:
www.boschrexroth.com/hnc100