40/44 Bosch Rexroth AG SYHNC100-SEK...3X | RE 30162-B/04.11
Disassembly and replacement
Disassembly and replacement10
Preparing disassembly10.1
NOTE
The device might be destroyed!
Decommission the entire system as described in the overall system manual.
f
De-energize the device and all connected components. f
Disassembling the digital controller assembly10.2
Proceed as follows to disassemble the SYHNC100-SEK...3X:
Pull off the connection lines and plugs.
f
Release the SYHNC100-SEK...3X from the top hat rail. f
Press down
Apply pressure and
tilt out top down.
Disassembly of the SYHNC100-SEK...3X from the top hat railFig. 16:
Preparing the components for storage/further use10.3
Proceed as follows in order to prepare the SYHNC100-SEK...3X for storage and
further use:
Only use the geniune packaging for storage.
f
Observe the admissible storage temperature range that is specified in f
RE 30162.
Protect against dust and humidity.
f
To Next Page
Loading...
