Bosch Rexroth SYHNC100-SEK 3 Series - Installation Requirements

RE 30162-B/04.11 | SYHNC100-SEK...X Bosch Rexroth AG 37/44
Commissioning
Installation requirements7.3
The following system specifications are required for the PC program WIN-PED®:
IBM PC or compatible system •
Windows XP •
Main memory (recommendation: 512 MB) •
100 MB of available hard disk capacity •
An interface cable RS232 (length 3 m; material no. R900776897) as well
as an USB RS232 converter (material no. R901066684) are
not included in
the scope of delivery, can, however, be ordered separately. See chapter 6.2
"Recommended accessories" on page 23.
HNC - PC connection via serial interface7.3.1
Establish the connection between the SYHNC100-SEK...3X and your PC as
follows:
Connection and required accessoriesFig. 15:
Make the SYHNC100-SEK...3X ready for operation:
Carefully check the wiring.
f
Apply operating voltage to the SYHNC100-SEK...3X. f