Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
38/60 Commissioning
Bosch Rexroth AG, VT-VPCD, RE 30028-B/09.13
The program folder also contains a help file that describes the configuration and
handling of your control electronics.
After having installed the BODAC software, proceed as follows:
1.
Connect the serial interface cable (mat. no. R900776897) to the port of the
control electronics VT-VPCD.
2. Plug the serial interface cable into the serial interface (COM) port of your PC or,
if required, use a USB converter – Mat. no. R901066684.
The control electronics VT-VPCD and the PC are now connected.
3. Start software BODAC.
4. Perform the software-sided startup as described in the online documentation
and RE 30028-01-B.
To Next Page
Loading...
