Bosch SHP65CC5UC - Page 45

Troubleshooting en-us
45
Issue Cause and troubleshooting
Food remnants on
dishware.
Dishware was placed too close together or rack is
overfilled.
1. Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the
dishware.
2. Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked.
▶ Arrange dishware so it does not obstruct spray arm
rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms → Page41 .
Filters are dirty.
▶ Clean the filters.
→ "Cleaning filters", Page40
Filters are inserted incorrectly and/or not engaged.
1. Insert the filters properly.
→ "Filter system", Page40
2. Twist filters into place.
Selected wash cycle is too light.
▶ Select a more intensive wash program.
Dishware has been precleaned too intensively. Then the
sensors choose a lighter cycle. Stubborn remnants
cannot be entirely removed.
▶ Only remove large remnants of food and do not pre-
rinse dishware.
Tall narrow containers in corner areas are not rinsed out
adequately.