en-us Troubleshooting
44
Issue Cause and troubleshooting
Dishware is not dry.
▶ Position dishware at an angle where possible.
The combined detergent used has a poor drying
performance.
1. Use rinse aid to improve drying performance.
2. Use a different combined detergent with a better
drying performance.
Extra Dry/intensive drying not activated to improve
drying performance.
▶ Activate Extra Dry/intensive drying.
Dishware removed too early or drying process not yet
ended.
1. Wait until the program ends.
2. Only remove dishware 30minutes after the program
has ended.
Rinse aid used has a limited drying performance.
▶ Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware is not dry. Silverware not arranged properly in the silverware
basket or silverware drawer.
Droplets can form on the contact points of silverware.
1. Arrange silverware individually where possible.
→
Page29
2. Avoid points of contact.
Appliance interior still
wet after wash cycle.
Not an error. Condensation drying creates water
droplets in the tub. This is normal. Moisture in the air
condenses on the inside walls of the appliance, runs off,
and is pumped out.
No action required.
To Next Page
