Solution 64
|
Installer Guide
|
Programming Overview
Bosch Security Systems | 11/05 | BLCC110I
4-7
6 Devices
7 System
6-0 Commands
7-0 Commands
UMI 6-0-0 Keypad Status
UMI 7-0-0 Panel Status
UMI 6-0-1 RF Status UMI 7-0-1 System Trouble
UMI 6-0-2 Serial Status
UMI 7-0-2 History Log
UMI 6-0-3 Output Status I 7-0-3 Domestic Default
UMI 6-0-4 P / Supply Status
I 7-0-4 Factory Default
UMI 6-0-5 GSM Status I 7-0-5 Template Default
UMI 6-0-6 Ethernet Status
I 7-0-8 Service Mode
UMI 6-0-7 Access Status
UMI 6-0-8 X10 Status
7-1 Clock
MI 7-1-0 Set Date & Time
6-1 Keypads
I 7-1-1 Summertime On
MI 6-1-0 Volume
I 7-1-2 Summertime O
MI 6-1-1 Contrast
MI 6-1-2 Backlight 7-2 Timers
I 6-1-3 Home Area I 7-2-0 Exit Time
I 6-1-4 General Options
I 7-2-1 Entry Time 1
I 6-1-5 Beeper Options
I 7-2-2 Entry Time 2
I 6-1-6 Emergency Keys
I 7-2-3 Part Entry Time
I 6-1-7 Access Group I 7-2-4 Auto Arm Pre Alert
I 6-1-8 Lockout Time
I 7-2-5 Output Pre Alert
I 7-2-6 Senior Watch Time
6-2 RF Devices
I 6-2-0 Receiver Options 7-3 Power
I 6-2-1 SuperSolution Time
I 7-3-0 AC Options
I 6-2-2 RF Device Options I 7-3-1 Battery Options
I 6-2-3 Add RF Keypad I 7-3-2 Fuse Options
I 6-2-4 Delete RF Keypad
I 6-2-5 View RF I.D. 7-4 Siren
I 7-4-0 Tone
6-3 Serial Device I 7-4-1 Speed
I 6-3-0 Device Type I 7-4-2 Volume
I 6-3-1 Baud Rate I 7-4-3 Siren Swinger
I 6-3-2 Flow Control
7-5 Schedules (TEF)
6-5 GSM Modem MI 7-5-0 Name
MI 7-5-1 Time
6-6 Ethernet
MI 7-5-2 Day
I 7-5-3 Function
6-7 Access Controller
I 7-5-4 Index
6-8 X10 Device 7-6 Holidays
MI 7-6-0 Name
MI 7-6-1 Start Stop Dates
7-7 System Options
I 7-7-0 General Options
I 7-7-1 Area Options
I 7-7-2 Keypad Idle Screen
MI 7-7-3 Keypad Hi/Lo Temp
I 7-7-4 Installer Options
I 7-7-5 Language
7-9 System Testing
UMI 7-9-0 Walk Test All Zones
UMI 7-9-1 Battery Test
Table 12: Menu Reference Table
To Next Page
Loading...
